Gebo Original for PE pipes 153/155 + 222

GEBO / Products / gebooriginal / Gebo Original for PE pipes 153/155 + 222

Gebo Original for PE pipes 153/155 + 222

Areas of application:

Repairs to existing pipelines and new installations of pipes for the fluids water, gas accordingly to DVGW G260, compressed air, heating oil (conforming to DIN 51603-1).
Compression fittings of cast malleable iron for PE pipe:
PE 80, PE 100, PE-Xa-pipe (each SDR 11) concerning DVGW – working sheet GW 335 A2/A3 as well as DIN 8074/75, DIN EN 12201-2 and DIN 16893
Typical Areas of application: Domestic connection pipes in the gas supply

Fluids:

Water, Gas (outside buildings), Compressed air

Series 153/155 PE pipes 20 – 63 mm:

TYPE A

with male thread

Pressure stages:

Water (20°C): PE80 and PE-Xa PN 12,5, PE 100 PN 16; Gas: PE80, PE100 and PE-Xa PN 4; Compressed air: PE80, PE-Xa PN 10, PE100 PN 12,5

Tests:

Water: DIN 8076/DIN EN 10284, DVGW-Reg-Nr.: CW-7511CP0631; Gas: DVGW sheet G 5600-1; DVGW-Reg.-Nr.: DG-7521CP0412

Series 220 PE pipes 75 – 110 mm:

TYPE AF

with male thread

Fluids:

Water, Compressed air

Pressure stages:

Water (20°C), Compressed air PN 10

Type A/AF is available in the following diameters:

DN	Jointing thread x pipe outer-Ø [mm]	Code
15	1/2" x 20	03.153.00.0120
20	3/4" x 25	03.153.00.0225
25	1" x 30 *	03.153.00.0330
25	1" x 32	03.153.00.0332
32	1 1/4" x 38 *	03.153.00.0438
32	1 1/4" x 40	03.153.00.0440
40	1 1/2" x 50	03.153.00.0550
50	2" x 63	03.153.00.0663
65	2 1/2" x 75 *	03.220.00.0775
80	3" x 90 *	03.220.00.0890
100	4" x 110 *	03.220.00.09110

Pipe outer-⌀ in 30, 38, 75, 90, 110mm are not for gas applications!

Series 153/155 PE pipes 20 – 63 mm:

TYPE I

with female thread

Pressure stages:

Water (20°C): PE80 and PE-Xa PN 12.5, PE100 PN 16; Gas: PE80, PE100 and Pe-Xa PN 4; Compressed air: PE80, PE-Xa PN 10; PE100 PN 12.5

Tests:

Water: DIN 8076/DIN EN 10284, DVGW-Reg-Nr.: CW-7511CP0631; Gas: DVGW sheet G 5600-1; DVGW-Reg.-Nr.: DG-7521CP0412

Series 220 PE pipes 75 – 110 mm:

TYPE IF

with female thread

Fluids:

Water, Compressed air

Pressure stages:

Water (20°C), Compressed air PN 10

Type I/IF is available in the following diameters:

DN	Jointing thread x pipe outer-Ø [mm]	Code
15	1/2" x 20	03.153.01.0120
20	3/4" x 25	03.153.01.0225
25	1" x 30 *	03.153.01.0330
32	1" x 32	03.153.01.0332
32	1 1/4" x 38 *	03.153.01.0438
40	1 1/4" x 40	03.153.01.0440
50	1 1/2" x 50	03.153.01.0550
50	2" x 63	03.153.01.0663
65	2 1/2" x 75 *	03.220.01.0775
65	3" x 90 *	03.220.01.0890
100	4" x 110 *	03.220.01.09110

Pipe outer-⌀ in 30, 38, 75, 90, 110mm are not for gas applications!

Series 153/155 PE pipes 20 – 63 mm:

TYPE O

clamping on both sides

Pressure stages:

Water (20°C): PE80 and PE-Xa PN 12.5, PE100 PN 16; Gas: PE100 PN 10, PE80 PN 4, PE-Xa PN 8; Compressed air: PE80 and PE-Xa PN 10, PE100 PN 12.5

Tests:

Water: DIN 8076/DIN EN 10284, DVGW-Reg-Nr.: CW-7511CP0631; Gas: DVGW sheet G 5600-1; DVGW-Reg.-Nr.: DG-7521CP0412

Series 220 PE pipes 75 – 110 mm:

TYPE OF

clamping on both sides

Fluids:

Water, Compressed air

Pressure stages:

Water (20°C), Compressed air PN 10

Type O/OF is available in the following diameters:

TYPE O/OF STEEL-PE

DN	Pipe outer-Ø [mm]	Code
15	21,3 x 20	03.154.02.0120
20	26,9 x 25	03.154.02.0225
25	33,7 x 32	03.154.02.0332
32	42,4 x 38 *	03.154.02.0438
32	42,4 x 40	03.154.02.0440
40	48,3 x 50	03.154.02.0550
50	60,3 x 63	03.154.02.0663
65	76,1 x 75 *	03.220.02.0775
80	88,9 x 90 *	03.220.02.0890
100	114,3 x 110 *	03.220.02.09110

TYPE O/OF PE-PE

DN	Pipe outer-Ø [mm]	Code
15	20 x 20	03.155.02.20
20	25 x 25	03.155.02.25
25	30 x 30 *	03.155.02.30
25	32 x 32	03.155.02.32
32	38 x 38 *	03.155.02.38
32	40 x 40	03.155.02.40
40	50 x 50	03.155.02.50
50	63 x 63	03.155.02.63
65	75 x 75 *	03.220.02.75
80	90 x 90 *	03.220.02.90
100	110 x 110 *	03.220.02.110

Pipe outer-⌀ in 30, 38, 75, 90, 110mm are not for gas applications!

Series 153/155 PE pipes 20 – 63 mm:

TYPE T

clamping on both sides with female outlet

Pressure stages:

Water (20°C): PE80 and PE-Xa PN 12.5, PE100 PN 16; Gas: PE80, PE100 and Pe-Xa PN 4; Compressed air: PE80, PE-Xa PN 10, PE100 PN 12.5

Tests:

Water: DIN 8076/DIN EN 10284, DVGW-Reg-Nr.: CW-7511CP0631; Gas: DVGW sheet G 5600-1; DVGW-Reg.-Nr.: DG-7521CP0412

Series 220 PE pipes 75 – 110 mm:

TYPE TF

clamping on both sides with female outlet

Fluids:

Water, Compressed air

Pressure stages:

Water (20°C), Compressed air PN 10

Type T/TF is available in the following diameters:

TYPE T/TF STEEL-PE

DN	Pipe outer-Ø x jointing thread 1 x 2 x 3	Code
15	20 x 20 x 1/2"	03.155.04.20
20	25 x 25 x 3/4"	03.155.04.25
25	30 x 30 x 1" *	03.155.04.30
25	32 x 32 x 1"	03.155.04.32
32	38 x 38 x 1 1/4" *	03.155.04.38
32	40 x 40 x 1 1/4"	03.155.04.40
40	50 x 50 x 1 1/2"	03.155.04.50
50	63 x 63 x 2"	03.155.04.63
65	75 x 75 x 2 1/2" *	03.220.04.75
80	90 x 90 x 3" *	03.220.04.90
100	110 x 110 x 4" *	03.220.04.110

TYPE T/TF PE-PE

DN	Pipe outer-Ø x jointing thread 1 x 2 x 3	Code
15	21,3 x 20 x 1/2"	03.154.04.0120
20	26,9 x 25 x 3/4"	03.154.04.0225
25	33,7 x 32 x 1"	03.154.04.0332
32	42,4 x 38 x 1 1/4" *	03.154.04.0438
32	42,4 x 40 x 1 1/4"	03.154.04.0440
40	48,3 x 50 x 1 1/2"	03.154.04.0550
50	60,3 x 63 x 2"	03.154.04.0663
65	76,1 x 75 x 2 1/2" *	03.220.04.0775
80	88,9 x 90 x 3" *	03.220.04.0890
100	114,3 x 110 x 4" *	03.220.04.09110

Pipe outer-⌀ in 30, 38, 75, 90, 110mm are not for gas applications!

Series 153/155 PE pipes 32 – 63 mm:

TYPE OR

clamping on both sides, reduced

Pressure stages:

Water (20°C): PE80 and PE-Xa PN 12.5, PE100 PN 16; Gas: PE100 PN 10, PE80 PN 4, PE-Xa PN 8; Compressed air: PE80 and PE-Xa PN 10, PE100 PN 12.5

Tests:

Water: DIN 8076/DIN EN 10284, DVGW-Reg-Nr.: CW-7511CP0631; Gas: DVGW sheet G 5600-1; DVGW-Reg.-Nr.: DG-7521CP0412

Type OR is available in the following diameters:

TYPE O/OR STEEL-PE

DN	Pipe outer -Ø [mm]	Code
20 x 25	26,9 x 32	03.154.02.0232
20 x 32	26,9 x 40	03.154.02.0240
25 x 20	33,7 x 25	03.154.02.0325
25 x 32	33,7 x 40	03.154.02.0340
25 x 40	33,7 x 50	03.154.02.0350
32 x 20	42,4 x 25	03.154.02.0425
32 x 25	42,4 x 32	03.154.02.0432
32 x 40	42,4 x 50	03.154.02.0450
32 x 50	42,4 x 63	03.154.02.0463
40 x 25	48,3 x 32	03.154.02.0532
40 x 32	48,3 x 40	03.154.02.0540
40 x 50	48,3 x 63	03.154.02.0563
50 x 32	60,3 x 40	03.154.02.0640
50 x 40	60,3 x 50	03.154.02.0650

TYPE O/OR PE-PE

DN	Pipe outer -Ø [mm]	Code
20 x 25	25 x 32	03.155.02.2532
20 x 32	25 x 40	03.155.02.2540
25 x 32	32 x 40	03.155.02.3240
25 x 40	32 x 50	03.155.02.3250
32 x 40	40 x 50	03.155.02.4050
32 x 50	40 x 63	03.155.02.4063
40 x 50	50 x 63	03.155.02.5063

Series 153/155 PE pipes 20 – 63 mm:

TYPE OL

clamping on both sides, long version

Pressure stages:

Water (20°C): PE80 and PE-Xa PN 12.5, PE100 PN 16; Gas: PE100 PN 10, PE80 PN 4, PE-Xa PN 8; Compressed air: PE 80 and PE-Xa PN 10; PE 100 PN 12.5

Tests:

Water: DIN 8076/DIN EN 10284, DVGW-Reg-Nr.: CW-7511CP0631; Gas: DVGW sheet G 5600-1; DVGW-Reg.-Nr.: DG-7521CP0412

Type OL is available in the following diameters:

TYPE O/OL STEEL-PE

DN	Pipe outer-Ø [mm]	Code
15	21,3 x 20	03.154.03.0120
20	26,9 x 25	03.154.03.0225
25	33,7 x 32	03.154.03.0332
32	42,4 x 40	03.154.03.0440
40	48,3 x 50	03.154.03.0550
50	60,3 x 63	03.154.03.0663

TYPE O/OL PE-PE

DN	Pipe outer-Ø [mm]	Code
15	20 x 20	03.155.03.20
20	25 x 25	03.155.03.25
25	32 x 32	03.155.03.32
32	40 x 40	03.155.03.40
40	50 x 50	03.155.03.50
50	63 x 63	03.155.03.63

Series 153/155 PE pipes 20 – 63 mm:

TYPE WO

elbow, clamping on both sides

Pressure stages:

Water (20°C): PE80 and PE-Xa PN 12.5, PE100 PN 16; Gas: PE80 PN 4, PE-Xa PN 8, PE100 PN 10; Compressed air: PE80 and PE-Xa PN 10, PE100 PN 12.5

Tests:

Water: DIN 8076/DIN EN 10284, DVGW-Reg-Nr.: CW-7511CP0631; Gas: DVGW sheet G 5600-1; DVGW-Reg.-Nr.: DG-7521CP0412

Type WO is available in the following diameters:

TYPE WO STEEL-PE

DN	Pipe outer-Ø [mm]	Code
15	21,3 x 20	03.154.08.0120
20	26,9 x 25	03.154.08.0225
25	33,7 x 32	03.154.08.0332
32	42,4 x 40	03.154.08.0440
40	48,3 x 50	03.154.08.0550
50	60,3 x 63	03.154.08.0663

TYPE WO PE-PE

DN	Pipe outer-Ø [mm]	Code
15	20 x 20	03.155.08.20
20	25 x 25	03.155.08.25
25	32 x 32	03.155.08.32
32	40 x 40	03.155.08.40
40	50 x 50	03.155.08.50
50	63 x 63	03.155.08.63

Pipe outer-⌀ in 30, 38, 75, 90, 110mm are not for gas applications!

Series 156 32 – 63 mm:

TYPE WA

elbow, with male thread

Pressure stages:

Water (20°C): PE80 and PE-Xa PN 12.5, PE100 PN 16; Gas: PE80, PE100 and Pe-Xa PN 4; Compressed air: PE80 and PE-Xa PN 10, PE100 PN 12.5

Tests:

Water: DIN 8076/DIN EN 10284, DVGW-Reg-Nr.: CW-7511CP0631; Gas: DVGW sheet G 5600-1; DVGW-Reg.-Nr.: DG-7521CP0412

Type WA is available in the following diameters:

DN	Jointing thread x Pipe outer-Ø [mm]	Code
25	1" x 32	03.153.09.0332
40	1 1/2" x 50	03.153.09.0550
50	2" x 63	03.153.09.0663

Series 153/155 PE pipes 20 – 63 mm:

TYPE EK

End cap

Pressure stages:

Water (20°C): PE80 and PE-Xa PN 12.5, PE100 PN 16; Gas: PE100 PN 10, PE80 PN 4, PE-Xa PN 8; Compressed air: PE80 and PE-Xa PN 10, PE100 PN 12.5

Tests:

Water: DIN 8076/DIN EN 10284, DVGW-Reg-Nr.: CW-7511CP0631; Gas: DVGW sheet G 5600-1; DVGW-Reg.-Nr.: DG-7521CP0412

Type EK is available in the following diameters:

DN	Pipe outer-Ø [mm]	Code
15	20	03.153.07.20
20	25	03.153.07.25
25	32	03.153.07.32
32	38,0 *	03.153.07.38
32	40	03.153.07.40
40	50	03.153.07.50
50	63	03.153.07.63

Pipe outer-⌀ in 38 is not for gas applications!

LEARN MORE

Media library