Gebo Original HTB for gas series 180 + 225

GEBO / Products / gebooriginal / Gebo Original HTB for gas series 180 + 225

Gebo Original HTB for gas series 180 + 225

Areas of application:

Repairs to existing pipelines and new installation of pipelines for the domestic gas installation conforming to DVGW G 260.

High temperature-resistant compression fittings of cast malleable iron for steel pipe: Threaded pipe conforming to DIN EN 10255 and DIN EN 10220 series 1.

Typical areas of application: Repairs of gas lines within the house, New installation of gas lines within buildings.

Fluids:

Gas

Temperatures:

Gas: –20 bis +60 °C

Series 180 21.3 mm – 60.3 mm:

TYPE AT

with male thread

Pressure stages:

Gas PN 5

Tests:

Gas: DIN 3387-1, DVGW-Reg.-Nr.: NG-4502AP1417

Series 225 76.1 mm – 114.3 mm:

TYPE AFT

with male thread

Pressure stages:

Gas PN 1

Tests:

Gas: DIN 3387-1, DVGW-Nr.: NG-4502AP1474

Type AT/AFT is available in the following diameters:

DN	Jointing thread x Pipe Outer-Ø [mm]	Code
15	1/2" x 21,3	01.180.00.01
20	3/4" x 26,9	01.180.00.02
25	1" x 33,7	01.180.00.03
32	1 1/4" x 42,4	01.180.00.04
40	1 1/2" x 48,3	01.180.00.05
50	2" x 60,3	01.180.00.06
65	2 1/2" x 76,1	01.225.00.07
80	3" x 88,9	01.225.00.08
100	4" x 114,3	01.225.00.09

Series 180 21.3 mm – 60.3 mm:

TYPE IT

with female thread

Pressure stages:

Gas PN 5

Tests:

Gas: DIN 3387-1, DVGW-Reg.-Nr.: NG-4502AP1417

Series 225 76.1 mm – 114.3 mm:

TYPE IFT

with female thread

Pressure stages:

Gas PN 1

Tests:

Gas: DIN 3387-1, DVGW-Nr.: NG-4502AP1474

Type IT/IFT is available in the following diameters:

DN	Jointing thread x Pipe Outer-Ø [mm]	Code
15	1/2" x 21,3	01.180.01.01
20	3/4" x 26,9	01.180.01.02
25	1" x 33,7	01.180.01.03
32	1 1/4" x 42,4	01.180.01.04
40	1 1/2" x 48,3	01.180.01.05
50	2" x 60,3	01.180.01.06
65	2 1/2" x 76,1	01.225.01.07
80	3" x 88,9	01.225.01.08
100	4" x 114,3	01.225.01.09

Series 180 21.3 mm – 60.3 mm:

TYPE OT

clamping on both sides

Pressure stages:

Gas PN 5

Tests:

Gas: DIN 3387-1, DVGW-Reg.-Nr.: NG-4502AP1417

Series 225 76.1 mm – 114.3 mm:

TYPE OFT

clamping on both sides

Pressure stages:

Gas PN 1

Pressure stages:

Gas: DIN 3387-1, DVGW-Nr.: NG-4502AP1474

Type OT/OFT is available in the following diameters:

DN	Pipe Outer-Ø [mm]	Code
15	21,3 x 21,3 (1/2")	01.180.02.01
20	26,9 x 26,9 (3/4")	01.180.02.02
25	33,7 x 33,7 (1")	01.180.02.03
32	42,4 x 42,4 (1 1/4")	01.180.02.04
40	48,3 x 48,3 (1 1/2")	01.180.02.05
50	60,3 x 60,3 (2")	01.180.02.06
65	76,1 x 76,1 (2 1/2")	01.225.02.07
80	88,9 x 88,9 (3")	01.225.02.08
100	114,3 x 114,3 (4")	01.225.02.09

Series 180 21.3 mm – 60.3 mm:

TYPE TT

outlet with female thread, clamping on both sides

Pressure stages:

Gas PN 5

Tests:

Gas: DIN 3387-1, DVGW-Reg.-Nr.: NG-4502AP1417

Series 225 76.1 mm – 114.3 mm:

TYPE TFT

outlet with female thread, clamping on both sides

Pressure stages:

Gas PN 1

Tests:

Gas: DIN 3387-1, DVGW-Nr.: NG-4502AP1474

Type TT/TFT is available in the following diameters:

DN	Pipe Outer-Ø [mm] x Jointing thread. 1 x 2 x 3	Code
15	21,3 x 21,3 x 1/2"	01.180.04.01
20	26,9 x 26,9 x 3/4"	01.180.04.02
25	33,7 x 33,7 x 1"	01.180.04.03
32	42,4 x 42,4 x 1 1/4"	01.180.04.04
40	48,3 x 48,3 x 1 1/2"	01.180.04.05
50	60,3 x 60,3 x 2"	01.180.04.06
65	76,1 x 76,1 x 2 1/2"	01.225.04.07
80	88,9 x 88,9 x 3"	01.225.04.08
100	114,3 x 114,3 x 4"	01.225.04.09

Series 153/155 PE pipes 32 – 63 mm:

TYPE ORT

clamping on both sides, reduced

Pressure stages:

Gas PN 5

Tests:

Gas: DIN 3387-1, DVGW-Reg.-Nr.: NG-4502AP1417

Type ORT is available in the following diameters:

DN	Pipe Outer-Ø [mm]	Code
25 x 20	33,7 x 26,9 (1" x 3/4")	01.180.02.0302
32 x 20	42,4 x 26,9 (1 1/4" x 3/4")	01.180.02.0402
32 x 25	42,4 x 33,7 (1 1/4" x 1")	01.180.02.0403
40 x 25	48,3 x 33,7 (1 1/2" x 1")	01.180.02.0503
40 x 32	48,3 x 42,4 (1 1/2" x 1 1/4")	01.180.02.0504
50 x 32	60,3 x 42,4 (2" x 1 1/4")	01.180.02.0604
50 x 40	60,3 x 48,3 (2" x 1 1/2")	01.180.02.0605

Series 180 21.3 mm – 60.3 mm:

TYPE OLT

clamping on both sides, long version

Pressure stages:

Gas PN 5

Tests:

Gas: DIN 3387-1, DVGW-Reg.-Nr.: NG-4502AP1417

Type OLT is available in the following diameters:

DN	Pipe Outer-Ø [mm]	Code
15	21,3 x 21,3 (1/2")	01.180.03.01
20	26,9 x 26,9 (3/4")	01.180.03.02
25	33,7 x 33,7 (1")	01.180.03.03
32	42,4 x 42,4 (1 1/4")	01.180.03.04
40	48,3 x 48,3 (1 1/2")	01.180.03.05
50	60,3 x 60,3 (2")	01.180.03.06

Series 180 21.3 mm – 60.3 mm:

TYPE WOT

elbow, clamping on both sides

Pressure stages:

Gas PN 5

Tests:

Gas: DIN 3387-1, DVGW-Reg.-Nr.: NG-4502AP1417

Type WOT is available in the following diameters:

DN	Pipe Outer-Ø [mm]	Code
15	21,3 x 21,3 (1/2")	01.180.08.01
20	26,9 x 26,9 (3/4")	01.180.08.02
25	33,7 x 33,7 (1")	01.180.08.03
32	42,4 x 42,4 (1 1/4")	01.180.08.04
40	48,3 x 48,3 (1 1/2")	01.180.08.05
50	60,3 x 60,3 (2")	01.180.08.06

Series 180 33.7 mm – 60.3 mm:

TYPE WAT

elbow with male thread

Pressure stages:

Gas PN 5

Tests:

Gas: DIN 3387-1, DVGW-Reg.-Nr.: NG-4502AP1417

Type WAT is available in the following diameters:

DN	Pipe Outer-Ø [mm]	Code
25	1" x 33,7	01.180.09.03
40	1 1/2" x 48,3	01.180.09.05
50	2" x 60,3	01.180.09.06

Series 180 21.3 mm – 60.3 mm:

TYPE EKT

End cap

Pressure stages:

Gas PN 5

Tests:

Gas: DIN 3387-1, DVGW-Reg.-Nr.: NG-4502AP1417

Series 225 76.1 mm – 114.3 mm:

TYPE EKFT

End cap

Pressure stages:

Gas PN 1

Tests:

Gas: DIN 3387-1, DVGW-Nr.: NG-4502AP1474

Type EKT/EKFT is available in the following diameters:

DN	Pipe Outer-Ø [mm]	Code
15	21,3 (1/2")	01.180.07.01
20	26,9 (3/4")	01.180.07.02
25	33,7 (1")	01.180.07.03
32	42,4 (1 1/4")	01.180.07.04
40	48,3 (1 1/2")	01.180.07.05
50	60,3 (2")	01.180.07.06
65	76,1 (2 1/2")	01.225.07.07

LEARN MORE

Media library